Metal Slitting Machine Line

RTLS (0-40m/min slitting speed) Low Speed Slitting Line (i.e. metal coil slitting machine/ slitter line) is used for processing the CR/HR, stainless steel, pre-painted or galvanized steel coils less than 6mm thickness into narrow steel strip coils with desired width. This line usually cooperated with the roll forming machine or tube mills. Flow Chart Coil lifter ---- hydraulic decoiler ---- snubber roller ---- pinch roll ---- loop bridge ---- side guide roller ---- slitting machine ---- scrap recoiler ---- loop bridge ---- damping, separator & pressing device ---- recoiler ---- unload cart Model Item RTLS- 3×1250 RTLS- 3×1600 RTLS- 4×1300 RTLS- 4×2000 RTLS- 5×1000 RTLS- 5×1800 RTLS- 6×1600 Material CR/HR steel coil, carbon steel, pre-painted steel coil, galvanized steel coil, stainless steel Tensile strength≤450Mpa) Coil thickness (mm) 0.5-3 0.3-3 0.8-4 0.3-4 0.6-5 1-5 1-6 Coil width(mm) 500-1250 800-1600 500-1300 800-2000 800-1600 800-1800 800-1600 Coil weight(T) 12 15 20 20 6 30 30 Slitting speed(m/min) 0-40Width accuracy (mm) ±0.1 We could also supply the high speed slitting line (0-120m/min) since the material is less than 3mm thickness. Also we supply start-stop cut to length line, heavy duty cut to length line/ slitting line and combined lines.