Steel Coil Slitting Machine

This Slitting Line is used for processing the hot rolled steel coils less than 20mm thickness through decoiling and slitting and then turned into steel strip coils with desired width with semi-automatization.This whole line is composed of coil lifter, decoiler, snubber roller, pre-leveler, small accumulator (loop bridge with conveyor), side guide device, slitting machine, scrap recoiler, large accumulator, damping (tension) device, recoiler, pressing & separator device, support for recoiler, unload carts, hydraulic & electrical system.It adopts centralized control by PLC, with single, manual & automatic operation. Equips with the touch screen, the operations is much more convenient. Also because of the centralized control of the whole line, it can adjust the line speed in accordance for meeting different demands of variable thickness. Model RTLS-12×1600 Material Carbon steel coils (tensile strength≤400MPa) Material Thickness 3-12mm Material Width 1600mm Width Accuracy for Slitting ±0.1mm Slitting Speed 0 40m/min Capability of the Decoiler 30T No. of Slitter Strips 2 6mm (13 pcs); 8 12mm (5 pcs) Input Coil I.D. Φ500 Φ800mm Input Coil O.D ≤Φ2000mm Diameter for slitting shaft Φ320mm (Material: 40Cr) Slitting Knives Dimension: Φ320×Φ480×40; Qty: 28 pcs; Material: 6CrW2Si; Hardness: HRC58 60 We also supply the high speed slitting line for material less than 3mm thickness, low speed slitting machine, cut to length machine, cut to length and slitting line, tube mills, various roll forming lines.